Seo se fanang ka tataiso ena

• E sebetsang, ea moreki e tsitsitseng Mochine oa methapo Likhetho tsa lipakete tsa ho paka lijana tsa melaetsa le lipampiri tsa ho fana ka marang-rang.

• Mafolo a morao-rao a eketsa tlhahiso joang, Ho Tšoara, le ho bala ha ho ikemisetsa, e leng qetellong e eketsa "boleng ba lapeng"-Le boleng ba setsi sa hau.

• Likhetho tsa Boenjiniere le Likhetho tsa Lintho Tse Fetelletseng "The Music

Mechine ea pakete ea pampiri - mochini oa mealo

Hobaneng ho na le mechini e nang le mechini e ntse e atleha ho 2025

1. Ho tšoarella ka lebelo. Ngoliso ea Serto, tsitsipano e koahetsoeng, le litsela tse koetsoeng e boloka lisekoere sekweretsing se thata, haholo-holo

2. Fokotsoa ke thepa le thepa. Li-pads tsa fan -s le liners li u tsebisa sephutheloana se loketseng, ho fokotsa chelete le ho fokotsa litefiso tsa thomello.

3. Lirekoto tsa tlhahlobo-leseling. Li-ID tsa Boatch

4. Theko e tlase ea likokoana-hloko. Makhoaba a se nang meeli a fokotsa likhatiso, kobo e mpe le litletlebo tsa bareki. Qetellong sehlopha sa hau sa litšebeletso se emisa ho kōpa tšoarelo bakeng sa libuka tse nyarosang.

5. Ts'ebeliso e Sebetsa ea Ts'ebetso. Lihlekehleke tse potlakileng le ho tsamaisoa ha likenke tse tsamaeang ka letsoho

Papiso ea lehlakore

Lisebelisoa le khetho: Seo re se tsamaisang (le hore na hobaneng ho le molemo)

Li-stock tsa lefatše tsa nnete, eseng pampiri ea lab

• Recycle & fsc kraft (80-180 gsm): tloaelehileng bakeng sa libuka / risiti; e hloka litsela tse ling tsa anti-curl le li-setting tse nepahetseng tsa ho qoba litsebe le skew.

• Fanfold Corugated (Leseli le le leng / le habeli): bakeng sa lipampiri / linester; E hloka litaolo tsa Gury Web tsa marang-rang, taolo ea nip e pharaletseng, 'me ea amana le lijana tsa ho thibela ho arohana le ho sithabetsoa.

• Lipampiri tse koahetsoeng / tsa Offset: Moriri oa Primium Bulelano, o nahanela tšenyo ea ho phalla; Knife e nang le khatello ea maikutlo e kopantsoeng.

• Marang-rang le Mehala ea Meroalo (Haeba Inline): Tack e sa fetoheng / e le peel bakeng sa ho koaloa ha batho ba babeli le lienfetepo e khutšoane.

Hobaneng ho otlaha hona "lifoldara tse tloaelehileng
Mechining ea thepa ea thepa ea thepa ea thepa Liindasteri Mochine oa methapo Li-partems tse feto-fetohang tse fapaneng le li-grati tsa servo

Boenjiniere le ts'ebetso: Tsela ea ho se hokae e etsa mokhoa o tšoarellang

Drive le ngoliso

• Servo Drives + Gened Boloka ngoliso ea Panel e tsitsitse tlasa ho potlakisa le ho qhekella.

• Recipe Locks store fold plates, buckle gaps, nip and heater settings (where applicable)—operators recall the golden setup in seconds.

Boleng ba sebaka sa marang-rang

• Khohlano e koetsoeng e koetsoeng le Khoebo ea Web thibela skele esita le ka liboto tse teteaneng.

• Anti-curl Rollers & Tunning Knife / Buckle Combanition Makhotla a tsamaisana le li-stock-ba fokolang

• Inline inppection (pono / boima) Flags e sebelisang lintho tse fosahetseng, ho rekisa hampe le ho lahlela maqephe a mangata pele lithoana li otlile libenche.

• Stack-and-com E fana ka li-zig tsa zig-Zag ka li-barcode tsa li-tranelali tsa sekolo.

Ts'ebeletso le polokeho

• Liforati tse thata, li ne li lebelletse li-nips, tse koalang / ho tsoa Fokotsa kotsi ea ketsahalo le ho holisa bophelo.

• LITLHAKISO TSE KHOLO 'Me ho bolela esale pele ka hlokofatsa li hlokofatsa MTRR ebe u boloka nako e le holimo ka linako tsa pek.

Ntlha ea bohlokoa: Boenjiniere bona bo fetolela ho Likhathala tse Nyane, Li-cursovers tse khutšoane, le LITLHOKOMELISO TSA BOPHELO-Ta Tsamaiso ea litaba tse bohlokoa ho ts'ebetso, lichelete le ho tiea.

Setsebi sa Boitsebiso, Liteko le Bopaki

• Melaoana e ntse e sutumetsa moralo-ea pele le ho thunngoa. Ho boloka boleng bo nang le boleng ho kopanya hape le ho fokotsa ho boloka litšila le ho fokotsa litšila le ho fokotsa litšila ho KPIS.

• Matsete a latela Roi. Limela li etelletsa pele pele ho liphetoho tse potlakileng, li-fordars tse phahameng hobane li tlase ho kenella ka tlase, ho sireletsa litšenyehelo tsa thepa, le ho tsikitlanya taolo ea thepa.

• Phihlelo ea bareki e theko e tlase ha u leta. Litšoantšo tsa Crisp tsa CISPP le Snug liners li khaola "litletlebo"

• Ho tšoarella ha ho na thuso. Liforama tse thata le likhohlano tse tsitsitseng li boloka sebopeho se nepahetseng ka mor'a lihora tse likete-litulo tsa hau tsa ho lula li boletsoe esale pele.

Lipontšo tsa saense le Kpi

• Chai ea pele ea ho fetisetsa (FPY) bakeng sa memers ≥ 99.5% ka licheke tsa inline.

• Nako ea phetoho -40-00% Mabitso a bonngoe a sebelisa mohopolo oa recipe le 'mapa oa lomed.

• Sekhahla sa Scrap-30% mabapi le ho hlakola hape ka mor'a khatello ea likhohlano

• Dim e bolokang ka tsela e 'ngoe Ha o fetohela li-lick tse halikiloeng haholo bakeng sa ho etsa se nepahetseng.

• Litšireletso tse ntle tsa bareki -25-50% (li-inshoeds, li-coneds tse bolaeang.

Tsena ha li na meeli ea sets'oants'o sa limela le litlatsetso. Bakeng sa sebaka sa hau sa marang-rang, notlela Motheo oa Mosieli, Run A / b ea ho bapala ka liteko tsa Drop / Ship

Mochini oa mabenkele bakeng sa libuka

Mehlala e meraro ea ts'ebetso - mehlala ea setaele (e hlophisitsoeng, e sebetsang)

1. Books & Media 3pl (EU)
   E amoheloe Maqhubu a marang-rang a ferekane ho hlahisa liners ka litlhokahalo. Tšenyo e re e tlohang ho tloha Crance Crush Fall 28%; lipalletso ka 40 'HQ e ntlafalitsoe ka lebaka la ho sikisoa ho etsa joalo. Ho ts'oaroa ha peakn-karolo ea mosebetsi o boima hobane e tlositsoe butle-butle.

2. Li-cosmetics dtc (na)
   Ho nkile lipampitšana tsa Kopano tsa Matsoho le A Mochini oa ho penta pampiri. Liphetoho li akhehile ho tloha ho tse 20 ho isa ho Metsotso e 7 U sebelisa liloko tsa recipe; Mefuta e fosahetseng e oela 60%. Tlhahlobo ea bareki "Ho paka ha Premium" ho eketsehile kotara e latelang.

3. Libaka tsa indasteri e kantle ho naha (apac → EU)
   Li-parase tsa fan-foldara tse kopantsoeng le ts'ireletso ea Edmotion e sehiloeng ho tlosoa ba sithabetseng. Liketane tse tšehetsang; Pheta litaelo li Rose. Lisebelisoa tsa tlhokomelo li bonts'a liphetoho tse amanang le methapo ea tension kamora ho fetola taolo ea web ea Servo.

Re na le mang (in-mola e le 'ngoe, ka hare)
Mechine ea SnostOPACY Haha Bolulo Mochine oa methapo Litsamaiso-tse ling tsa lipampiri tse halikiloeng ho fana ka pampiri e tobileng le tse kopantsoeng le tlhahlobo le tlhaiso ea data. Hlahloba: / ho etsoa hamane-packs-packs / mme / mochini o phallang /.

Mechini e pentiana "e eketsa boleng"

• OpE OEEE & FPY → EBRDDA. Li-2 tsa ho hlakisa litlolo tse fokolang li fana ka tlhahiso le ho phatloha ho fetisisa.

• Ho bala ha tlhahlobo ho fokotsa kotsi. Li-ID tsa Batch, lirekoto tsa tlhahlobo le linyehelo tsa risepe tse sa koahetsoeng.

• Litoro tsa thepa le lintho tse sa feleng li hlaha ka moruo oa moruo. Li-paarts tse hantle le li-liners li tiisa mabokose ntle le pakete e fetang pakete.

Senotlolo sa moreki 

Ts'ebetso le lifomate

• Stock Range (GSM & Caliper); bophara ba machaena; Buckle / thipa sets; TARGET CPM / MPM

• Li-Zig-Zag Stack Literaka tsa Stack, Barcode / Batch Rea Holimo; Ho mamella bakeng sa SKEW, phapang e phallang

Mana le data

• Plc / hmi e nang le liloko tsa risepe; Oee Dashboard; pono / cheke ea boima ba 'mele; lahla logic

• Inline kharin / Label (logo / QR / Lota); li-logging li-class (CSV / AI) ho QMS ea hau / erp

Ho latela tumellano le lisebelisoa

• Ho sebelisana ho hokahanya hape (ka lehlakoreng le leng)

• Ts'ebetso e netefalitsoeng ka mokhoa o netefalitsoeng oa kraft e nchafalitsoeng le fanfold currugated (mafura / Sat matrix)

TLHOKOMELISO

• MTBF / MTR PRCETS; LITLHAKISO TSE KHOLO; Likhompo tsa matlo a lehae

• Koetliso (basebelisi / Tlhokomelo); Kemiso ea PM; Mekhoa ea Ts'ireletso

Tlhahiso ea mosebelisi (e khethiloeng)

• "Fanfold liriers e qetella e sekhutlo - ops lead, nl

• "Li-locpe tse bolokiloeng li ile tsa emisoa li-croft li sa tloaelehang hona joale." - Printa Supervisor, UK

• "Lingaka tse hole li ile tsa utloahala sethaleng sa poak-15 se otla setulo sa lihora tse 1." - Hlooho ea hlooho, de

Pampiri ea ho phutha limpho tsa mochini

LBH

Mochini o penta o etsa eng ka sephutheloana?
E na le mealo ea mantlha bakeng sa lits'oants'o, mananeo, lipataiso / liners le likarolo tsa maleli. Phello ke lebelo le phahameng, boleng bo sa fetoheng, le mosebetsi o fokolang ho lijeke.

Fan-myed vs.
Bo-fanfold balla bakeng sa likhalase tsa tlhokahalo ea likhetho / liners (tse nepahetseng, tse khutsitseng tsa mahutla). Metsamao e lekantsoeng ea marang-rang e tsoelang pele. Limela tse ngata li sebetsa ka bobeli.

Na e ka sebetsana le ho nchafatsoa ka ho hlatsuoa le fanfold currunated ntle le curling?
Ho joalo, haeba u hlatsolele litataiso tsa Web tsa Web, litsela tsa anti-creal, li-puckle tse nepahetseng / thipa ea thipa le ho koaheloa ke metsi a koahetsoeng. Kopa barekisi ho paka sena ka mafura / a lutse ka metšoasong ea hau e mpe ka ho fetisisa.

Mochini o petetsang o thusa joang ka ho latela?
E hlahisa sephutheloana se leka-lekaneng, se boholo se nepahetseng le ho boloka lintlha tsa batch / tse bolokang lintlha tsa tlhahlobo-leseling, hantle-holo ke lebenkele le sethala.

Ke lokela ho lebella roi joang?
Meputso e tloaelehileng e tsoa ho meetso e fokolang / litlhahiso, tse khuts'oane, li-drim tse nyane, le li-sebone tse ngata tse senyehileng tsa ho bona chelete ea likhoeli tse 12-24.

Litšupiso 

1. PMMI • Ho rekisoa ha metjeko ea metjeko ea metjeko ea metjeko

2. PMMI • Kholo, mekhoa le menyetla e mecha ea ho paka mathekeng, 2024 • PMMMI / NPE

3. Khomishene ea Europe • PphWr oleder ea PPWr • Khomishene ea Europe

4. Upm Raflatac • PPWR Timeline le boikemisetso ba indasteri • Repm Rafulatac

5. US EPA • Lijana & Phuthelo: Lintlha tse Ikhethileng tsa Product

6. US EPA • Kakaretso ea Naha: MSW Lintlha le lipalo

7. DS SMITH • Litopollo tse senyehileng le tse senyehileng tsa bareki • D Smith Pargement

8. DS STM SMITHER

9. Patlisiso ea 'Maraka oa' Mele oa 'Mōtso • Tlaleho ea Mabenkele a Bochana ea Benthold Comreation 2025 • CMR

10. Ho paka • Ho silafatsa mabenkele a makhulo a morao-rao (2025-2034) • ho paka

11. Reis, A. Et al. • Ho khutsufatsa nako ea liphetoho tsa liindasteri - ea Indasteri (Smed) • University / Patlisiso

12. EI3 • Ho ntlafatsa mokhoa oa ho hatisa o feto-hatisang nako ka ho fokotsa nako ea liphetoho tsa phetoho