• Nke ugbua Machiini na-ebunye 18-28 ngwugwu / min na skis skis na 1,200-1 Mail / Hour Na Envelope Lanes mgbe oge 1 nke izu.

• Ya na grometry geometry na 10-18% Ebumnuche Dejuo, na-agafe profaịlụ nyocha na-emebi emebi na oke mbibi ikuku.

• A na-enwekarị mmeri mgbe Cartan Cars na-arụ ọrụ na ọrụ ọrụ: -25-40% ojiji nke Dunnage, -15-40% nloghachi n'ihi na mmetụta nkuku / shumplent), -8-15% ihe eji eme ihe.

• Sistemu akwụkwọ dị mfe ESG / EPR akwụkwọ na ndị na-ere ahịa na-ere ahịa; Ha dị mfe iji nyocha karịa mmiri.

Kedu ihe bụ ngwugwu mpempe akwụkwọ?

Machiini Gbanyụọ akpaghị aka ma ọ bụ nke na-akpaghị aka na-emepụta nchịkwa akwụkwọ, pads, ma ọ bụ ndị ọkà mmụta maka nkwado nchekwa ngwaahịa na ngwakọ ngwaahịa. The Modicals Mode:

• Ndị na-enye ihe na-enye mmiri ya na njupụta nke puru iche

• Ndị na-eme akwa na -emepụta ọtụtụ ply

• Machiner maka padded ma ọ bụ ike ya na-eme ka eriri akpa akpa akpa akpa akpa

• Njikwa (Anya-Anya), Pedutalkwụ, Preset Iche, PLC Interface)

Gịnị kpatara o mere dị mkpa: Site na iwepụta ihe dị oke ọnụ na-aga, ị nwere ike belata oghere na-enweghị isi, belata ihe na-enweghị isi, wee na-enweghị ohiri ohi ma ọ bụ ohi polyliws.

Commismụaka na-ebubata igwe eji arụ ọrụ

Otu akwụkwọ na-eme vs. plastics (nọmba ị nwere ike ịgbachitere)

• Nchedo: Na graf gral-croshry Geometry, padts mpempe akwụkwọ ruru ụdị ọnụ ọgụgụ nke elu-elu na isi ohiri isi ikuku maka 1-6 n'arọ PGC. Plus Plus Plus nwere ike ịchọ Ahịhịa-siri ike na katọn siri ike.

• Ọsọ: Agwakọta-shuation-slutions na-eme ka ọ bụrụ ihe na-akwado 18-28 ngwugwu / min Ọzụzụ Post; Mailer lana 1,200 / hr Na eserese anya foto na akara akara.

• Akwụ ụgwọ: Ezigbo onye ọkwọ ụgbọ ala abụghị ọnụahịa / kg-ọ bụ kg / usoro. Idozi mkpokọta Ratios na A19 Ọbá akwụkwọ na-ebipụ Dunnage site na 25-40%; Mmebi iwu mebiri mgbe izu-abụọ na-agagharị.

• Ọrụ & Ergonomics: Ihe mkpuchi ụkwụ na-anọpụ iche (bench + 15-20 cm nozuve iru) na padal na-ebuli elu na-ebuli ya site na 2-4 packs / belata ihe mgbochi na-arụ ọrụ ọgwụ.

Core Teknụzụ & Ihe Mere Ha Ji Dị Mkpa

1. Njikwa Grumetry Geometry

   • Profaịlụ-azọpịpịpịpị na-eme ka ike dị elu karịa ka ị na-adọka mmiri dị na otu gradage.

   • Uru: obere nke ala na akuku akuku.

2. Precet Ebe nchekwa & Oru Oru

   • Profaịlụ nke ụlọ ahịa maka ụyọkọ / ọkara / nke na-esighi ike (e.G.), 12%, 15%, 18% jupụta).

   • Uru: ihe na-agbanwe agbanwe na ọnụego ngafe nke ọzọ.

3. Foto foto (Anya Anya & pedal na-ekwupụta

   • Ezigbo nri, mmalite mmalite / kwụsị lag.

   • Uru: nkwụsi ike site na awa ole na ole.

4. Mailer Auto-ndepụta na Label Mmekọrịta

   • Belata iju ọnụego ka ọ bụrụ <1.5% na nkwalite batrị nwere ihe dị iche.

Mmemme nke ụbọchị 10 (zere izu-1

• 1-2 | Slusterring: Otu site na oke, na-abaghị uru. Nyefee ebumnuche mbụ (10/12/15/18%).

• 3-4 | Ngwa ngwa tụlee: Na-agba ọsọ / Enced / akuku na 1.0-1.2 m; Kwalite oke egwu nke na-agafe ụyọkọ.

• 5bọchị 5-6 | Nkuzi onye oru: Na-akụzi "abụọ na-adọkpụ na adọta" okpukpu atọ; na-ebuli ya elu akụkụ na bench dị elu.

• Daybọchị 7-8 | ATETON CASTER: Na-emechi katọn. Tinye akwa nkuku naanị ebe achọrọ.

• Day 9-10 | Mkpọchi & Nyocha: Ifze Presets, depụta otu ndị na-ese okwu otu, bido 6-Izu izu.

Ndukọ, EPP & "Ozi Ọma"

Ndị na-ere ahịa na ndị na-enyocha ihe na-akwụ ụgwọ na-akwụghachi ụgwọ ọrụ nchekwa:

• Traceability: Nkwupụta Listicing Comments + Recyclity Notes dị mfe iji na-atụnye karịa mmiri iyi.

• ErPary: Usoro usoro akwụkwọ na ọtụtụ atụmatụ nchịkọta nchịkọta nke ime obodo.

• Nchekwa / ndị mmadụ: Kacha mma na mbara igwe na bench dị elu belata mmeri ọkọlọtọ na "ndị mmadụ & nchekwa" ngalaba.

Ikpe azụmaahịa: Meta CFO-Level na-agagharị

1. Ọnụ ego mebiri / iwu 1,000 (kredit + rec).

2. Ihe kg / usoro (ọ bụghị ọnụahịa / n'arọ).

3. Ngwugwu / min n'otu ọdụ mgbe izu 2 gasịrị.

4. Carton Voot% na nkuchi aka nri.

5. Auditiness & Epr Dos izu ezu.

Iwu nke isi mkpịsị aka: Ọ bụrụ n 'mbibi na-emebi emebi na Kg / ịtụ Dọkịta ọnụọgụ abụọ nke izu 6, ọrụ akwụghachi ụgwọ ọrụ gị. Ọ bụrụ na naanị otu usoro na-agagharị, ị naghị eme ihe.

Zụta Checklist 

• Ngwaọrụ - obere jam na-anyụ (<60 s) na uzo akwukwo

• Preset Ncheta Maka profaịlụ paịlị

• Foto foto na anya ya na nbudata mgbanwe

• Map-akụkụ map Na Koodu QR na 24-48 H ọrụ SLAS

• Onyinye ọzụzụ maka ọrụ (Typer Charts + Vidio na-arụ ọrụ)

• Ọ dị mma inwe: Njikọ ọnụ, onye na-eri nri na Left mailpo-fatịlaịza na Label Mmekọrịta, na -achọgharị RMM.

Ngalaba Ngalaba (ebe akwụkwọ na-enwu)

• Ejiji & Softlines: Valocity dị elu, mpempe akwụkwọ skunce-mpempe akwụkwọ na-acha uhie uhie na-ejupụta na ìhè / ọkara; Ndị na-elekọta akwụkwọ na-ebipụta igbe.

• Mma & Nlekọta: Itingdị ngwa ahịa na-eme ka ndị na-eme ka ọ dịkwuo mma maka pasem QA.

• Obere ngwa: Addgbakwunye akwa akwa nkuchi + dị elu na-ahụkarị naanị na ụdị adịghị ike.

• Akwụkwọ & Mozis: Ndị na-eme ihe na-emerụ ihe ọjọọ.

Ihe ndi mmadu na ngwa agha

• Nkuku na-agabiga na izu 1 Tinye mpempe akwụkwọ àkwà mmiri, obere panel dị anya 10-15 mm, nyochaa ectiance.

• Overtụbiga mmanya ókè Ndị na-eme ka ndị na-eme ihe; Tinyegharịa na "Accord" ma tinye nduhie ihu.

• Mbupu Stalls Ghazie imeghari ya; Debe oghere n'ime 15-20 cm nke ọnụ; Ezuala bench 3-5 cm.

• Onye na-eme nri mailder → profat frity / profaịlụ nrụgide; Gbaa matrix 12-unit na mkpọchi elu 3 Ezi ntụziaka.

Mmejuputa okporo ụzọ (izu anọ)

• Izu 1: Ihe mmebi / site na-pg; Wụnye ọdụ ụgbọ elu.

• Izu 2: Trasers presets, ndị na-eme njem, na-ebipụta ụyọkọ otu ndị na-ese.

• Izu 3: Ulo elu Oner Lane + Label Mmekọrịta; Azụmaahịa Aaton.

• Izu 4: Nyochaa njikwa; Nyefee oghere ndị ọzọ; ịhazi oge na-emegharị.

Ngwakọta mpempe akwụkwọ dị elu

Ajụjụ 

Q1: Akwukwo akwukwo di ka ohiri oria ikuku?
Ee-Ọ bụrụ na ekiri. Site na rejuoos refioos na pad Geometry, mpempe akwụkwọ na-ahụkarị ihe ngosi ISTA-Style dobe ihe ọtụtụ 1-6 n'arọ skus; Courgesdị na-emebi emebi nwere ike ịchọ àkwà mmiri.

Q2: ga-agbanye akwụkwọ anyị na-eji nwayọ?
Ọ bụghị mgbe emechara. A zụrụ azụ 18-28 ngwugwu / min; onyeozikele lanes iru 1,200-1,600 / hr ya na ngwa nri na label mesoc.

Q3: Kedụ ka anyị na-ejide ego?
Mesho kg / usoro, obughi onu ahia / kg. Standative cyuster (10/12/15%), katọn dị mma, na ịmanye "iwu onye ọrụ" ụzọ abụọ.

Q4: Kedu asambodo ma ọ bụ akwụkwọ ndị anyị chọrọ?
Debe nkọwa ndị na - eweta akwụkwọ, ndetu nke foncing ndetu, na ụlọ ọrụ na-arụ ọrụ na mkpọ. Ndị a na-emeju ọtụtụ ndị na-ere ahịa na ee.

Q5: Gịnị ka onye ọkwọ ụgbọ igwe anyị kwesịrị ịgụnye?
Họrọ ụyọkọ 3 skuster (igwe / ọkara / nke na-emebi emebi), na-agbakwa ụgwọ ụbọchị iri, yana ihe na-efu efu / 1,000 iwu, ngwugwu / min, na Kg / Nye. Ọnụ ọgụgụ naanị mgbe izu-2 na-ejide.

Ebe zoro aka

1. ASTM International. Usoro Omume Maka Nnwale Ntanetị Ntanetị na Sistemu (ASTM D4169). West Creahoromen, PA: ASTM International.

2. Ndị na-ahụ maka nchekwa nke mba ụwa (ISTA). Usoro 3A: Ngwaahịa packged maka mbufe ngwugwu. Lansing, MI: ISTA, 2024.

3. European Federation nke ndị na-emepụta bọọdụ (Felco). Nkwado na recyclity na ngwugwu mpempe akwụkwọ 2025. Brussels: Akwukwo nke Fafco, 2025.

4. U.S. Agencylọ ọrụ nchekwa nchekwa (EPA). Studialsdị ihe dị iche iche na-aga n'ihu: companics facects. Washington, DC: EPA Office nke ala na njikwa ihe mberede.

5. Smithers Pira. Ọdịnihu nke nkwakọ ngwaahịa na-adigide na 2030: Amụma ahịa zuru ụwa ọnụ na usoro. Akpụkpọ anụ, UK: Ndị otu nyocha Smithers.

6. Porter, Elaine & Kruger, Matthias. "Nrụpụta nnwale nke mpempe akwụkwọ VS. Blastic." Journal nke teknụzụ na nyocha, Vol. 13 (4), 2024.

7. Akwụkwọ mpempe akwụkwọ European (EPPA). Ntugharị na kọntaktị nri nri nke nkwakọ ngwaahịa. Brussels: Akwụkwọ EPPA na-acha ọcha, 2023.

8. Ellen Macarhur Foundation. Ọgụọ akụ na ụba ọhụrụ ahụ: na-atụgharị ọdịnihu nke nkwakọba. Coes, UK: Ellen Macarhur Foundation, 2022.

9. Ndị na-emepụta igwe eji arụ ọrụ (PMMI). Steeti ụlọ ọrụ na-arụ ọrụ na-emekọ ihe 2025. Nkewa, Va: PMMI Azụ ọgụgụ PMMI.

10. ISO 18601: 2023. Nchịkọta na gburugburu ebe obibi - General chọrọ ihe maka iji ISO ụkpụrụ na ebe a na-emekọ ihe. Geneva: Ngalaba International maka ịkọwapụta.