• Kajeno Mechine ea pakete ea pampiri E fallisetsa 18-28 packs / min ka skoss e tsoakiloeng le 1,200-1,600 Mailers / hora ka li-tenes tsa envelopu kamora nako ea ho hula beke ea 1-2.

• Ka geometry e nepahetseng le 10-18% Ho tlatsa liphofu tsa void - ho tlatsa li-cushions tsa pampiri ho fetisetsa lipapatso tse tloaelehileng tsa liteko tse nang le litefiso tse bapisoang le meroalo ea moea.

• E tloaelehileng e hapa ka mor'a mabokose a nang le mabokose a nepahetseng le mosebetsi o tloaelehileng: -25-40% Pholoso ea Duncyage, -15-40% e khutlela ka lebaka la likhutlo / li-facts tsa motlakase (Sku e itšetlehileng), -8-15% Litsenyehelo tsa thepa ka tatellano.

• Litsamaiso tsa Maper Fower Esg / epr Litokomane le lintlha tsa thekiso ea chelete; Li nolofalloa ke ho hlahloba ho feta ho feta melapo ea polasetiki.

Ha e le hantle metjeko ea pampiri ea pampiri ke eng?

Mechine ea pakete ea pampiri Ho kenyelletsa mekhoa e ikemetseng kapa e ikemetseng e iketsang likhomo tsa pampiri, lipampiri tsa ts'ireletso ea sehlahisoa le ho kopanya thoriso. Li-module tse tloaelehileng:

• Ho tlatsa li-depenser tsa void Ka letsoalo le nang le lefu la crumple

• Baetsi ba Pad Pad Ho baka marokho a mangata a holimo

• Mechini ea Maiile Bakeng sa li-rali tsa li-fiber tsa paddled kapa tse thata tse nang le auto label sync

• Taolo (Marola a lifoto, maoto a maoto a maoto, memori ea Phahameng, PLC

Lebaka Leo e Leng: Ka ho hlahisa mekhoa e tetemang, ho ka fokotsa sebaka sa lefeela, o ka tiisa libaka, a ketekoa - ntle le mesamo ea bofokoli.

Barekisi ba ho tsamaisa thepa ea pampiri

Lipapali tsa pampiri li na le li-pastics (lipalo tseo u ka li sirelletsang)

• Ts'ireletso: Ka lebaka la koluoa ​​e koetsoeng le spish-cruils Skrus ea fragile / e phahameng marokho a thata le mabokose a thata.

• Lebelo: Liteishene tse kopaneng tsa skute 18-28 packs / min koetliso ea poso; Litsela tsa Mailer li feta 1,200 / hr Ka li-syc tsa mahlo le li-sync.

• Litsenyehelo: Mokhanni oa 'nete ha se theko / kg-ke kg / odara. Maemo a lekanyelitsoeng a tlatsa 25-40%; Tšenyo ea likoloto e oela ka mor'a beke-2 ho latela.

• Basebetsi & Ergonomics: Tsebo ea letsoho la letsoho la letšoao (benche + 15-20 cm

Technology Technologies & Hobaneng ba le taba

1. Taolo ea Geometry ea CruMotry

   • Liphatlalatso tsa Spiral-Suckjhelong e phahameng ho feta li-wades tse ntle ka har'a eona.

   • Melemo: Liketsahalo tse tlase tsa tlase tse ka tlase ho li-hunt marotholi.

2. Preet Download and Operrant Offer Standard

   • STORDS bakeng sa lihlopha tse bobebe / tse bonolo / tse bobebe / e., 10%, 12%, 15%, 18%, 18% tlatsa).

   • Molemo: tšebeliso e feto-fetohang le litekanyetso tse phetoang tsa ho feta.

3. Litšoantšo tsa litšoantšo tsa lifoto le li-pedal debounce

   • Fepa e boreleli, e sa khaotseng / emisa lag.

   • Molemong: ho nyoloha ha maemo a tlase ka lihora tsa Peak.

4. Mailer Auto-Fepelise ka Sengoli sa Sync

   • E fokotsa litefiso tsa ho hana ho <1.5% ho litheolelo tsa batch ka lintho tse fapaneng tse fapaneng.

Lenaneo la Metso ea 10 - Qoba beke-1 Dip)

• Letsatsi la 1-2 | Sku clafunte: Sehlopha ka boima ba boima, tekanyo ea karolelano; Fana ka lipehelo tsa pele (10/12/15/18%).

• Letsatsi la 3-4 | | Marotholi a potlakileng: Run Down / Edge / sekhutlo ka 1.0-1,2 m; Ho khothaletsa monyaka o tlase ho feta o fetang sehlopheng.

• LETSATSI LA 5-6 | Sesebelisoa sa Ts'ebetso: Ruta "ho hula ka makhetlo a mabeli. Kakaretso ea lintlha tsa nozzle le bolelele ba bench.

• Letsatsi la 7-8 | Pass laeborari ea koae: Tiisa mabokose a mabokose; eketsa marokho a marokho moo feela ho hlokahalang.

• Letsatsi la 9-10 | Lock & Audit: Li-presets tsa li-pryset, li phatlalatsa masholu a le mong ka linepe, qala ho latela RAM ea RMA ea 6-beke.

Ho latela, ERP & "Litaba Tse Molemo" Angle

Tlhahlobo ea lithuso le thepa ea thepa le thepa ea thepa

• Ho Thunisisa: Lipolelo tsa lipapali tsa mollo tsa fiberge + li bonolo ho tsekisa ho feta melapo ea likotikoto.

• TLHOKOMELISO: Litsela tsa pampiri li tsamaisana le merero ea pokello ea masepala.

• Polokeho / batho: Ho na le lerata le betere la nozzle le benche.

Nyeoe ea khoebo: Mechine ea mathomo ea CFA

1. Tšenyo ea litšenyehelo / tse 1 000 (Creets + Refere).

2. Lisebelisoa tsa kg / odara (eseng theko / kg).

3. Li-packs / Min ho Seteishini Kamora beke ea 2.

4. Carton void% le ho amoheloa ka mokhoa o nepahetseng.

5. Tlhahlobo ea Audit & ERP COPS phetheho.

Molao oa Thumb: Haeba tšenyo e senya li-purtens mme KG / Order e theohela ka makhetlo a mabeli ka beke ea 6, ho etsa mosebetsi oa hau oa ho lefa. Haeba feela khabollo e le 'ngoe e tsamaea, ha u e-so etsetsoa.

Ho reka lenane 

• Sesebelisoa-tlase jam se khomarela (<60 s) le tsela ea pampiri e hlakileng

• Preet Mohopolo Bakeng sa profiles e ngata ea pad

• GAM-SHITE ka bosholu ba taolo

• Mapa oa Likarolo tsa Setsi ka li-code tsa QR le li-trise tse 24-48 h

• Koetliso ea Koetliso ea Ts'ebetso (Cluster chate + livideo tsa Mesebetsi ea Mosebetsi)

• Ke thabela ho ba le: Ho kopana ka mokhoa o nepahetseng ka lebokose, maiketsetso a maiketsetso a marang-rang a nang le apole sync, skrineng rma loger.

Seketsoana sa Sekolo (moo pampiri e nang le eona)

• Feshene & Softlines: Velocity e phahameng, pampiri e pharaletseng ea skund-pampitšana Palo ea Mainers e sehiloeng ea Matlooa.

• Botle le tlhokomelo: Li-hat itigation li ntlafala ka li-moilied tsa balemi ba balehileng + seam qa.

• Lisebelisoa tse nyane: Tsitsa marokho a marokho + aper mabokose a makhapetla a makhapetla a makhapetla a ona

• Libuka le Media: Rigid / Fiber Malers oa li-slash le li-puncnage ka nako e le ngoe.

Lintho tse tloaelehileng tse tloaelehileng le ho lokisa ka potlako

• Spike ea sekhutlo ka beke ea 1 → Kenya Marokho a Lipapali, Pholiso ea Chelete e telele haholo 10-15 mm, netefatsa phapang ea Mp3.

• Ho sebelisa chelete → Basebeletsi ba sa tiisehe; Ho ikoetlisa ho "Tekanyetso ea" Sup-Tsebeli "le ho eketsa litataiso tsa pono tse lekang.

• Ka li-spall → fetola debounce debounce; Beha nozzle nakong ea 15-20 cm; Hlela bench 3-5 cm.

• Mailer Seam Splits → Re-tune ea mocheso / boemo ba khatello; Matha matrix ea 12-unit matrix 'me u notlela li-recipe tse 3 tse holimo.

Ho kenella ha tsela ea tsela (libeke tse 4)

• Beke ea 1: Tšenyo ea Basiline / ho bulla / kg; Kenya seteishini sa Pilot.

• Beke ea 2: Linokete tsa li-TUNE, basebetsi ba koetlisa ba boholong ba likhechana.

• Beke 3: Fana ka pelo ea Mailer Maleer + label sync; Atoloha Laebrari ea Carton.

• Beke 4: Tlhahlobo ea taolo; Tšela litsela tse ling; Rama ka nako ea kotara.

Mechini e phahameng ea pampiri ea boleng bo holimo

LBH 

Q1: Ke moputso oa pampiri e sirelletsang e le mosamo oa moea?
Ee-Haeba e kopantsoe. Ka li-geomet tse lokiselitsoeng tse lokisitsoeng le geotry, pampiri e tšoaeang lipeeletso tse tloaelehileng tsa sets'oants'o sa li-sota tse ngata bakeng sa tse ngata tsa pele 1-6 kg. Litloaelo tse bobebe li ka hloka marokho a marokho.

Q2: E tla fetohela ho pampiri e liehang ho fokotsa mohala oa rona?
Eseng kamora tsela. Liteishene tse koetliselitsoeng li Matla 18-28 packs / min; Mailer Litsela li fihlela 1,200-1,600 / hr ka ho fepa koloi le ho ngola.

Q3: Re laola litšenyehelo tsa lintho tse bonahalang joang?
Tekanyo kg / odara, eseng theko / kg. Boemo ba likarolo tsa mekhabiso (10/12/15/18%), mabokose a loketseng a boholo le tiisa 'ona

Q4: Ho na le litokomane kapa litokomane life tseo re li hlokang?
Boloka maruolelo a thepa ea thepa, filimi ea mollo o boima, le seteishene sa liteisheneng ka pakete ea tlhahlobo. Lipalo tsena tse khotsofatsang tse ngata tsa thekiso ea chelete le licheke tsa emer.

Q5: Motsamaisi oa rona o lokela ho kenyelletsa eng?
Khetha 3 SKU Clusters (lebone / mekhabiso / Fragile), u mameleng oa matsatsi a 10, lipakete / mets, le kg / odara. Scale feela ha liketsahalo tsa beke li na le.

Litšupiso

1. Astm machabeng. Tloaelo e tloaelehileng bakeng sa tlhahlobo ea ts'ebetso ea lijana le litsamaiso (asst d4169). Bophirimela Rakhoebo ba Westchoyken, PA: Asst la machabeng.

2. Mekhatlo ea machaba ea lipapatso tsa machabeng (Ista). Litoro tsa 3A: Lihlahisoa-lihlahisoa tsa ho tsamaisoa ha thepa ea parcel. Lansing, MI: Ita, 2024.

3. European e federation ea baetsi ba boto ea Cenrrugated (Fefco). Ho tsitsipana le ho ipeha ka pampiri ea pampiri ea 2025. Brussels: Lingoliloeng tsa Fefco, 2055.

4. U.S. Setsi sa ts'ireletso sa tikoloho. Tsamaiso e tsitsitseng ea lisebelisoa tse ts'ehetsang: Leqephe la bohlokoa la 2024. Washington, DC: Ofisi ea naha le maemo a tšohanyetso.

5. Smithers Pira. Bokamoso ba ho paka bo tsitsitseng ho 2030: LITLHAKISO TSA BOPHELO LE MABAKA. Leather Leatherhet, UK: Sehlopha sa lipatlisiso tsa Smithers.

6. Porter, Elaine & Kruger, Matthias. "Sesebelisoa sa tlhahlobo se bapisoang sa Parpoveta se nang le lisebelisoa tsa polasetiki." Sengoloa sa mahlale a ho paka, Vol. 13 (4), 2024.

7. Selekane sa pampiri ea Europe (EPPA). Mokhoa oa ho hlonepha le polokeho ea lijo tsa sephutheloana sa fiber. Brussels: Pampiri e tšoeu ea Eppa, 2033.

8. Ellen Macorrur Foundation. Moruo o mocha oa polasetiki: Ho laola bokamoso ba sephutheloana. Cowes, UK: Ellen MacArthur Foundation, 2022.

9. Setsi sa mochini oa mochini oa mochini o becha (pmmmi). Naha ea Indasteri ea liphutheloana 2025. Reston, va: Karolelano ea Ka bohlale la PMMR.

10. Iso 18601: 2023. Ho paka le tikoloho - Litlhokahalo tse akaretsang bakeng sa tšebeliso ea litekanyetso tsa Iso ho paka le tikoloho. Geneva: Mokhatlo oa Machabeng bakeng sa tekano.